Search:

Good idea, thanks. Still, it seems odd to me that everyone else's copy of Smaart has 0 dB bold but not mine.

Jim W.

The 0 dB horizontal line in TF is the same weight as all the other lines. How can I make this bold? I just looked at my colleague's screen and 0 dB is bold. I can't find that setting anywhere.
...

This was a feature of Smaart version 5 but was lost in version 6. You have a live trace and a stored trace on the screen and you press a key and get a new trace that is the difference between the two...

An update on this thread;
http://www.rationalacoustics.com/forums/showthread.php?935-Windows-7-Presonus-Fireox-drivers-not-working
The Firebox worked OK for a couple of months and then I started...

Solved it! with help from our office IT person. We had to install the Legacy 1394 Host Controller. That was a clunky process because the computer would get hung up each time I tried to install or...

Yow! Boy do I feel dumb. I checked the boxes of the devices I want to use and did not read where it said "ignore". My computer is currently in the process of installing windows XP emulation and I...

I found this on the Presonus website;
http://support.presonus.com/entries/113134-firestudio-family-how-do-i-uninstall-reinstall-my-firestudio-drivers-in-microsoft-windows
"FireStudio Family - How...

Which ignore box?

The EaseRA ASIO driver shows up in the Smaart Audio device options but not in the Measurement Config window and not in the Windows audio control window.

OK. I did a system restore and started again. Got a little further this time. T installed the driver in C:\Program Files\Presonus\1394 Audiodriver_Firebox on its own. But then I still got and error...

I will try that. Yes I think there is some feature in Windows 7 that prevents files from being written to the program files folder.

I think it might have to do with the folder it is attempting to install in. I get "installation failed" then "Created uninstaller : C\Windows\Temp\Presonus\Firebox\uninstall.exe"
"Output folder:...

The set up wizard in the last screen said "Setup failed to install device drivers. Please run set up again."

Oops. Here's that link;
http://www.presonus.com/technical-support/downloads/drivers-software/

64 bit. Here is the Presonus driver page. It is the Firebox.

New computer. I downloaded the PreSonus driver and installed it manually. I tried it several times. Usually, the installation fails. Sometimes it appears to install but then the driver doesn't show...

I just installed Smaart and moved my license to a new Windows 7 machine. I am having two problems. I moved the config default file from the old machine to the new machine but Smaart doesn't load it...

It seems to be the signal generator in Smaart. It works fine if I just turn it on but when I try to make a measurement it cuts off when it gets to anywhere between 400Hz and 1KHz. Also sometimes...

Same results using internal sound card. Works fine with Smaart 5 - not so good with Smaart 6.

Will do...stand by.

First screenshot shows IR using log swept sine in Smaart 6 "generate while recording impulse response" checked)

Second screen shot shows IR using log swept sine in Smaart 5 with continuously...

I'm not sure I understand. It seems you are saying that the harmonics build up at the end is a benefit of using log swept sine wave. Is that correct? If so should I just ignore the rising trace at...

I'm not sure how much I need. I can generate and measure simultaneously using pink noise just fine. In the past I had some problems with clicks and dropouts with my sound card, an EASERA Gateway....

I'm attempting to use the "generate while recording impulse response" feature in Smaart 6. The sweep stops halfway through at around 1K. If I use more than 1 average the sweep stops on the first pass...