Search:

Hey Guys,
Prehaps a better way to detect Buzz n rattle would be to use "Silence sweeps" ~ P.C. Farina AES 126 Munich 2009 or here: http://pcfarina.eng.unipr.it/Public/AES-126/

Acoustic flame suppression
http://www.youtube.com/watch?v=DanOeC2EpeA

Hey Guys,
don't forget jamie's Excellent videos on getting started

Hey Sidhu,
try this... used to work with v5 maybe it'll come back in a future release?

Hey Dr. J,
The change in EQ or contour on the subs from low level to higher levels suggests that the subs are being pushed into a non-linear region, prehaps more 2cnd harmonic distortion.
Also...

Hey Guys,
I looked at these a few years ago when I was at PRG the downside seems to be that each amp is 'married' to an individual driver and if you change a driver you have to re-program the...

ahh yes I too have various screen captures of that one :)

I've built versions of the arta pressure cham ber AP5 and a two port version of this one:...

Hey Arthur,
you might find this interesting....
485
486

Done :)

Hey Guys,
I can't remember the number of times I've seen systems where the processor is using "reccomended" limit points but the amp gains have been turned down totally upsetting the system.
Most...

Hey Guys,
my understanding was that calculating the limit points to match the amp gain to the drivers requirements needs the gain of the amp to be at full, if you turn the amp gain down aren't you...

Hey Johnny,
Here's that doc I talked about

Hey Guys,
for those following along at home, continue here: http://forums.prosoundweb.com/index.php/topic,134352.0.html

Hey Johnny,
congrats on getting Smaart to work, now it's all about figurimg out what the wiggly lines actually mean.

One of the best ways is to get to one of the Rational classes, but for now try...

Hey Arthur,
I've had to do reports to iso-3382[1] and iso-140[14] but I think this falls more under AcousticTools than Smaart

hey Guys,
this is interesting...... http://www.soundforums.net/live/threads/2348-Frequency-Response-Contour-EQ-in-full-range-systems.

Hey Guys,
maybe a little late but maybe this is of some help : http://www.aes.org/technical/documents/AESTD1001.pdf

OOPS, graphics missing from Doc :o

Hey Daniel,
Here's two papers that will get you started on FIR filters
enjoy ;)

Arthur,
Brilliant that's the one!
this oldtimers disease is...............what was I saying? :)

Errrmmm....
Mic diameter, 4KHz bump? :o rubbish - a half inch is good to about 24KHz
There's a Syn-Aud-Con paper by Pat Brown 349

Hey Guys,
I seem to remember that the bump in the response might be due to mic diameter, I think the B&K stuff mentioned this. there was also a Syn-Aud-Con paper on this. RH Campbell maybe?

Hey Dr J,
sorry for the late reply, I've been in class. You need to position the center of the capsule over the center of the turntable.
Keeping the speaker still and rotating the mic gives you the...

Hey Kip,
your fun experiment will measure the polar of the speaker and not the mic.
To measure the polar of the mic you need to rotate the mic on a fixed point.
Simple way is to get a lazy-susan,...

Hey Kip,
No I'm actually running off to Denmark for a training session then off around euroland for a bit.
I love the part about looking at OFAX dips DaveG is god :)