Search:

How exactly do you select the generator as the reference source?

I have a box that routes generator back to the reference in of my interface but this would be cleaner.

I am excited that Smaart v7.4 has the Acoustic Tools tools built in. I can't seem to find the NC Curve overlay that existed in the RTA of AT.

I just discovered locked cursor isn't yet available in v7. It's been a while since I did any time alignment and couldn't find a way to easily do it without a cursor locked to the longest delay.
...

There is an Ignore check box in the Audio Devices Options. Don't know how long it's been there (looking at v7.3). It'll take devices out of all lists (SPL input selector, global spec configuration...

I have a standard M30 circa June 2000 and it's 0.282" in diameter and did not come with a 1/2" adapter. It's too big to fit in the 1/4" adapter supplied with the calibrator I just bought. It's inner...

Makes sense for a scenario when you're starting from scratch. For scenarios where Smaart is being used for monitoring rather than measurement being able to shut down and restart Smaart without...

After calibrating the SPL, closing the calibration dialog causes the SPL display to jump to a vastly different level (typically negative which isn't realistic) and freeze.

Smaart must be closed...

In v6, the RTA calibration followed the SPL calibration. It appears RTA in v7 is always relative to dBFS. Is there a way to calibrate the RTA display?

Theres one v5 mode I miss in v6 and v7: SPL history. It's great to point at when a band engineer is exceeding set "speed limits" or the promotor asks the "how loud is it" question.

Every time I launch Smaart v7 it comes up in a default screen configuration: Spectrum, one window, RTA. I'd like Smaart to remember what windows I had selected when it was shut down. Smaart v5 worked...

It doesn't appear so in my case. There aren't any M-Audio tasks in task manager and the ProFire doesn't show up in Device Manager unless it's connected (in which case Smaart launches properly).
...

Right on! Connecting my ProFire interface or removing the M-Audio FireWire driver allows Smaart 7 to launch.

Unfortunately this isn't a long-term solution for me as this computer is used for...

I'm having the same problem on XP Home. ModName in crash details is mafwdiasio.dll. Let me know if more crash info would be useful.

I'm having the same problem with the combination of digiasio.dll and mafwdasio.dll (M-Audio ProFile series interfaces).

BOTH dlls need to be in \Windows\System32 to hang Smaart.

The computer...

I'm successfully using a Fast Track Ultra with Windows XP. (Vista may be another story.) I do have a problem with the laptop recognizing the interface when it's plugged in. This has nothing to do...

I was trying to be a purest and get Nyquist completely out of the way. But there's very little difference in measurements at 48 and 96 so there really isn't any need to waste CPU cycles on the...

The problem appears to be interaction with the Windows sound.

If Smaart and Sound recording in the Sounds and Audio Devices control panel are set to the same device, when Smaart is opened then...

I can't seem to make delay measurements with the audio interface set to 96 KHz. I normally get a delay of 0 but sometimes it's a large value. Switching to 48 KHz produces the correct value. All...

+1 for needing a low cost calibrator. The Galaxy CM-C200 appears to come with 1/2" and 1/4" adapters. Maybe Rational Acoustics can make a deal with Galaxy for the proper adapters for the mics in the...

I've noticed similar behavior if sample rate is set to 96 KHz. I'm not sure if it's a problem with the internal sound on my Gateway laptop or a bug in Smaart 6. It seems to work at 96K (I've got a...