PDA

View Full Version : Phase view Shortcut



Nicolás Suárez
November 14th, 2008, 11:41 AM
Hi, another problem...

I have a licensed smaart v6.1 runing under a Mac Book 13'', with Tiger 10.4.11.

I don't know how to change de "visual scale" for the Phase trace (starting at 0 and ending at 360 degrees, not with 0 degrees in the center of plot.

I had read the shorcuts page on the manual and says; alt/opt + start and alt/option + end, but for me this don't work; maybe the problem is in the keyboard style:

http://lowendmac.com/mail/mb07/art/macbook_keyboard.jpg

End and Start keys are the same that left and rigth keys.

I tryed to many posibilities, but I didn´t found it (included "fn" key posibilities)

I read several old posts, and I don't the rigth answer.

Arthur Skudra
November 14th, 2008, 12:20 PM
Nicolás,

1. First click on the phase trace window, anywhere within the window. This is real important.

2. Next hold down the "fn" key, and press the page up and page down keys (the cursor up and cursor down keys).

You can do the same in any Smaart trace window by simply clicking on it, then doing a fn+page up and fn+page down keys.

Arthur

Nicolás Suárez
November 14th, 2008, 12:49 PM
Ok, the problem was the click on the phase window. :D


Thanksssss